Transparent proxy clearos dalam mode standalone
modem ----------- Router ------------ Switch ---------- Client.....
...................................|..............................................
...................................|..............................................
....................ClearOS proxy server....................................
......................(Standalone mode).....................................
...................................................................
Alokasi IP
WAN Mikrotik 115.124.xx.xx
LAN Mikrotik 192.168.1.254
PROXY Mikrotik 192.168.3.2
ClearOS 192.168.3.1
Kebetulan saya menggunakan Mikrotik RB450
OK kita setting interfaces dan ip untuk mikrotik terlebih dahulu
/interface ethernet
set 0 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
"" disabled=no full-duplex=yes mac-address=00:0C:42:3D:XX:XX master-port=\
none mtu=1500 name=WAN speed=100Mbps
set 1 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
"" disabled=no full-duplex=yes mac-address=00:0C:42:3D:XX:XX master-port=\
none mtu=1500 name=LAN speed=100Mbps
set 3 arp=enabled auto-negotiation=yes comment="" disabled=no full-duplex=yes \
mac-address=00:0C:42:3D:XX:XX mtu=1500 name=proxy speed=100Mbps
/ip address
add address=115.124.XX.XX/30 broadcast=115.124.xx.xx comment="" disabled=no \
interface=WAN network=115.124.XX.XX
add address=192.168.1.254/24 broadcast=192.168.1.255 comment="" disabled=no \
interface=LAN network=192.168.1.0
add address=192.168.3.2/30 broadcast=192.168.3.3 comment="" disabled=no \
interface=proxy network=192.168.3.0
Setelah kita set DNS,NAT untuk LAN
/ip firewall nat
add action=src-nat chain=srcnat comment="" disabled=no dst-address=0.0.0.0/0 \
out-interface=to_isp src-address=192.168.1.0/24 to-addresses=\
115.124.XX.XX to-ports=0-65535
/ip dns
set allow-remote-requests=yes cache-max-ttl=1w cache-size=2048KiB \
max-udp-packet-size=512 primary-dns=202.182.XX.XX secondary-dns=\
202.159.XX.XX
/ip dns static
add address=192.168.3.1 disabled=no name=proxy ttl=1d
Setting IP Address Client
misal untuk client1
IP : 192.168.1.1
netmask : 255.255.255.0
gateway : 192.168.1.254
dns1 : 192.168.1.254
dns2 : 202.182.XX.XX
Test client untuk Browsing seharusnya sudah bisa kalau belum bisa periksa kembali
setting di atas sampai client bisa browsing
OK selanjutnya persiapan untuk proxy
buat NAT di Mikrotik untuk Proxy
/ip firewall nat
add action=src-nat chain=srcnat comment="link proxy" disabled=no dst-address=\
0.0.0.0/0 out-interface=WAN src-address=192.168.3.0/30 to-addresses=\
115.124.XX.XX to-ports=0-65535
add action=dst-nat chain=dstnat comment="transproxy" disabled=\
no dst-port=80,8080 in-interface=to_swicht protocol=tcp src-address=\
!192.168.3.1 to-addresses=192.168.3.1 to-ports=3128
setelah itu install CLearOS
install ClearOS Server Standalone Mode - No Firewall
edit file /etc/firewall, cari dan ganti parameter berikut
SQUID_TRANSPARENT="on"
[root@proxy etc]# cat firewall | grep SQUID
SQUID_TRANSPARENT="on"
edit file /etc/resolv.conf, tambahkan nameserver (DNS) ISP anda
[root@proxy etc]# cat resolv.conf
nameserver 202.182.xx.xx
pastikan gateway proxy sudah ke IP PROXY Mikrotik, jika menggunakan ClearOS
sudah ada di menu network->ip setting klik edit ikuti wizardnya dan jangan
lupa gateway dan dns nya sudah benar, untuk memastikan bisa lihat file ifcfg-eth0
ada di direktory /etc/sysconfig/network-scripts
[root@proxy network-scripts]# cat ifcfg-eth0
DEVICE=eth0
TYPE="Ethernet"
ONBOOT="yes"
USERCTL="no"
BOOTPROTO="static"
IPADDR="192.168.3.1"
NETMASK="255.255.255.0"
HWADDR="00:50:da:93:4c:53"
GATEWAY="192.168.3.2"
Jalankan Web Proxy ada di menu
gateway -> Web Proxy
klik start dan buat automatic
Jangan lupa buat acl nya dulu yah di Squid bisa dari webconfignya kok
Sekarang Proxy kita sudah siap di uji coba
sumber